3 Layers Face Masks Production Line

3 Layers Face Masks Production Line

Equipment Installation and Configuration Requirements:

(1) Equipment size: 6650mm (L) × 3560mm (W) × 2000mm (H);

(2) Equipment weight: about 1800kg, ground load ≤500KG / m2;

(3) Working power: equipment 220VAC ± 5 ﹪, 50HZ, rated power about 9KW;

(4) Compressed air: 0.5 ～ 0.7 MPa, the use flow rate is about 300L / min;

(5) Protection: 304# Stainless Steel protective cover for main transmission parts

(6) Operating environment: no flammable and corrosive gas, no dust.(cleanliness is not less than 100,000).

Production Line Specifications:

Standard type: 175 * 95mm

Five, equipment technical parameters:

(1) Equipment design speed: 120Pcs / minute

(2) Equipment production speed: 70-80 Pcs / minute

(3) Production efficiency: 100-110ppm;

(4) Qualification rate of equipment production: 95% (except when the incoming materials do not meet the requirements, or the employees improperly operate)

(5) Equipment failure rate: 2% (refers to the failure caused by the equipment itself)

Part2. Material Sizes

Part3. Layout

Part4. Production Line Introduction

Main Part Machine:

1. Nose Pin - Nose Pin Transmission - Nose Pin Cutting - Middle Place Nose Pin

2. Fabric - Lamination folding - Middle Place Nose Pin

1+2 : Middle Place Nose Pin - Ultrasonic compression - Main Part Cutting-Main Part Electrostatic Elimination

Dividing Machine:

Dividing into two channel - Main Part Feeding - Main Part Turn-Over - Main Part Pressed and Feeding

Ear Loop Welding Machine:

Ear Loop - Ear Loop Cutting - Ear Loop Fixed On Main Part -Ear Loop Combined with Main Part - Masks